Product Detail

BMC

Manufactures Representative

To contact us: BMC

Phone: 440-942-0633

Fax: 440-942-3454

E-mail: jim@bmcreps.com

Beyond 13 models of air filters with , different kinds of pre and . All Losma products are conceived with the criterion of the modularity. This allows you to carry out multiple combinations for being able to pull down in a specific way any mix of pollutants: fogs, smoke, smell, powders, metallic swarf.

The Losma Air Filtration Range is one of the most complete on the market today. It is made up of three product lines. For the the air cleaning we propose beyond 13 models of mist collectors in the versions turbine, single centrifuge and double centrifuge. All the models are ready for being arranged with a range width of modules of pre and after-filtration therefore to resolve in specific way any type of problem.
Our mist collectors can be directly installed on the machine tools. They remove the polluting from the source, and can easy be moved, and used again on other machines or switched off in case they are not used.

With four models giving no less than 24 permutations, the patented DARWIN series offers more installation possibilities.
It is the only oil mist filter that can be set either horizontally or vertically, making selection of the best position at the machine tool much simpler. Maintenance time is kept to a minimum thanks to the extreme accessibility of the internal components. Thanks to the special casing, Darwin filters allow the three rotors to be swapped depending on the type of problem to be solved, even after the initial installation. The same filter can therefore become a turbine, single or double centrifuge, adjusting to any factory expansion or any changes in production. Darwin Series:

- expansion ability

- advanced performances

- compactness and ductility

- easy installation and maintenance.

Modularity is one of the main advantages of the NEWTON line, becoming the most important element for high throughput oil mist filtration systems. By combining several units together (5000 m3/h each) it is possible to reach considerably high air flows.

Gemini is an air filter for oilmist, micro-mist, vapours and smokes, with pre and after filters included.

Gemini represents the perfect solution for all cases where the customer in little spaces has the need of both a pre and post-filtration.

Gemini is available in 2 sizes, S and M, with 3 standard configurations each.

Gemini grants filtration efficiencies from 95% up to 99,95%.
Choosing among the different filters combinations specific the right solution can be offered.

Thanks to its modularity, It is possible to add the activated carbons after-filter for those applications with bad or dangerous odours and HCP, or an extra absolute after-filter H13.

Newton, a system for the filtration of air in the workplace capable of eliminating oil mist and smoke caused by a variety of metal machining applications.

This solution has a very broad range of possible applications: machining centers, lathes, grinders, millings, screwings… Thanks to the specific characteristics of the material used, the Newton line assures an extremely high filtration efficiency according to the regulating norms.The opacimetric tests and lab analysis guarantee reliability and efficiency for the 2 versions available: 95% for the version in which the air is directly conveyed externally to the plant 99.97% for the version in which the air is recycled within the plant.

USES

The Newton line is the ideal answer for:

For the Equipment of Oversize machine tools

NEWTON becomes the logical evolution of Losma air filtration line, with air flow reaching up to 5.000 m3/h, in order to satisfy all kinds of needs.

Centralized Systems

Losma is always sensitive to the needs of the market, including specialised niches. The Air Filtration Range is completed with a system tailor-made for spark erosion.
SIRIUS ER 800 is a filter with a throughput of 800m³/h, designed specifically for the emissions from this type of machining. Equipped with no less than two pre-filtration stages (metallic and fabric) and four activated carbon cells, SIRIUS represents the most comprehensive solution to the particular characteristics of the fumes and odours given off by dielectric fluids used in spark erosion machining

From the simplest of cloth filters to more complex integrated systems with two or three filtration stages, the Losma Liquid Filtration Range is made up of various types of filter to cope with all eventualities.

Seven models with flow rates from 50 to 400 litres per minute (25 to 200 litres per minute for neat oil), using a fabric system of filtration. Also available in stainless steel AISI 304. It is suitable for the filtration of neat oils and emulsions contaminated with magnetic and/or non-magnetic particles. DETEX represents the simplest way to assure effective filtration with minimal maintenance and a limited expenditure. These strainers are ready-equipped with filter fabric in a variety of possible filtration levels (from 50 to 10 microns). They can also be used (in stainless steel form) for the filtration of water in the chemical, food and glass industries.

This is a magnetic separator made up of a number of ferromagnetic discs which trap the solid contaminants present in the coolant/lubricant. An important feature is its running costs - practically zero. Like DETEX, DEMAG treats up to 400 litres per minute.

This series is a combination of the previous two methods of filtration. It is a double stage filter in which the magnetic particles are first removed from the liquid which is then passed through a suitable grade of filter fabric depending on requirements.
The DECOM series is considered by the market to be one of the best filtration solutions thanks to its wide flow rate range (from 50 to 400 litres per minute), the high filtration levels it achieves and its versatility in combining DETEX and DEMAG filters of different sizes.

The RIVER series is available with high-pressure return pumps (up to 100 bar), filtration levels to 5 microns and flow rates from 25 to 100 litres per minute when working on neat oil. They are supplied with sophisticated systems for control and safety. Routine maintenance can be carried out without any machine downtime.

SPRING: the new self-cleaning drum filter.

The Spring is a self-cleaning drum filter complete with a fixed filtering membrane for the elimination of magnetic and amagnetic particles from both neat and soluble coolant liquids. The Spring Range comprises of 6 models capable of purifying from 20 – 300 l/min of neat oil and from 50 – 90 l/min of emulsions. The filtration efficiency of the drum can be customised according to the individual requirements.

The entire filtration process is completely automatic

MASTER Hydrostatic Head Filter !

The MASTER is a range of high-efficiency gravity filters which use non-woven fabric filters. The MASTER range is able to treat between 200 and 1000 litres of neat oil per minute and from 400 to 2000 litres of water-based emulsions per minute containing both metallic and non-metallic particles. Compared to other flat bed filters, of the same capacity, the MASTER’s overall dimensions are significantly smaller and can achieve greater levels of filtration. The MASTER is built within a sturdy structure of sheet steel inside which a continuous conveyor belt of metal mesh is pulled into a basin shape between two rotating disks; the filter is inserted between the disk and the belt. A double seal mounted on the outside of the disk, determines the wet seal of the system and prevents the dirty liquid from contaminating the clean liquid. As soon as the maximum level of liquid inside the filter basin has been reached, the gearbox is engaged which moves the support and the filter fabric along on the conveyor belt. The sludge which has been separated off, together with the used filter, is discarded outside in a collection container designed for this purpose.

The entire filtration process is completely automatic

See movie on

Losma